Every Engineering Industry has one or more Industrial Machines as listed above. For their continous and smooth operations it is essential to maintain the temperature of oil in the machine within safe limits of its working temperature level, thereby retaining its properties. This is made possible by installing Water Cooled Oil Coolers wherein the oil dissipates its heat to cooling water.

Along with your inquiry please specify -

Name of the fluid to be heated or cooled
Flow rate per hour and working pressure of the process fluid
Intel & desired outlet temperature of the process fluid
Temperature of cooling water available for cooling or pressure of steam available for heating, whichever applicable.
Heat to be dissipated in kcal/hr
Capacity in cfm of air incase of Compressor
HP/KW rating incase of Hydraulic Power Pake/D.G. Set/Furnace
Change Quenched in kg/hr incase of heat treatment process
The size of the existing Heat Exchanger incase of a replacement giving no. of tubes, OD & length of tubes,body diameter, passes etc.

It is not possible for every industry to provide cooling water as a cooling media to a Heat Exchanger (Cooler) due to conditions such as : places where supply of water is scarce, places where the system is mobile, places where continuous supply of water is not possible, places where cooling tower & relevant pumps are not economical. Under the circumstances Forced Air is used as a cooling media to cool the fluid, oil, water or coolant as the case may be. The cooling equipment employed in such events is called as Air-Blast Cooler or Radiator. In a Radiator the fluid is made to pass through the finned tubes and air is forced on them by a fan or a blower. The function of a Radiator is just similar to that in a car. 

The Compressed air is used in many Industries for variety of applications. The atmospheric air contains lot of moisture . The compression of air involves a considerable rise in it’s temperature. It is necessary to cool this air which otherwise may lead to the following bad effects :

Increase in size of the pipe-line due to higher volume of air at high temperature.
Increase in HP required for compression in interstages.
Development of cracks in pipe-line in long run.
Corrossion of pipe-line & machine tools due to moist air.

It is common that the air is compressed in one or more stages. Inter Coolers are provided between the stages to keep the temperature of air within safe limits while coming out from the next stage. After Coolers are used to cool the air coming out from the last stage. Generally water is used as a cooling media in both of these, as here the heat transfer co-efficient is higher than that in case of an air to air cooling.

What is so special in the design of these Coolers ?
As the air used is moist and is required to be cooled near to atmospheric temperature, there is a partial condensation of moisture.This factor is to be thoroughly considered while calculating the heat load, film co-efficients and LMTD.

We manufacture Steam Air Heaters for Paper/Pulp Industries, Fertiliser Industries, Chemical Industries, Rubber Industries, Oil Industries, Tobacco Industries & Dyes/Paint Industries.

In the Industries like listed above, Dryers/Dehumidifiers are functioning to dry the final product manufactured by them eg. Starch, Tobacco, Pharmaceuticals, Fertilizer, Paper-Pulp etc. When these products are in final stage they are passed through Dryers and the hot air is blown over them to take away their moisture contents. The hot air is partially exhausted and partially re-circulated through the blower. In Rubber, Dye- Paint, Oil Industries also to remove the humidity, hot air is required. In Milk Powder Producing Industries the hot air is blown over the milk falling down, thereby acheiving the dry Milk powder. In some industries the air is heated by using flue gases whereas in others it is heated by using steam or hytherm oil.

Description / Specification of Tube Bundle

We are involved in offering a wide range of Tube Bundle to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.

We introduce ourselves as an eminent trader and supplier of an extensive array of  Tube Bundle. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:

Sturdy design
Highly durable
Application specific design